Get in touch with UD Packaging Company
XCX
I write about strapping clips, seals, and buckles, especially how terminology can hide different joint requirements. My articles compare plastic and metal choices and explain the names used for similar parts. I aim to help readers match a fastening component to the strap and load rather than rely on a label alone.
Brick Strapping for Cooled Bundles: From Coil to Arrival
By XCX · Updated October 2026 Brick strapping connects a group of bricks with tensioned bands and joints. To select a polyester strap begins with the actual cooled bundle, its corners and the handling route. A roll specification helps select…
Plastic vs Metal Strapping Clips: Compare the Joint, Not the Label
The plastic vs metal strapping clips comparison is a buying comparison between polymer buckles and metal closures used to join or tension strapping systems. These parts aren’t interchangeable merely because both fit a quoted strap width; the usable choice depends…
Strapping Clips, Seals and Buckles: One Part, Nine Names, One Decision
Buyers search for strapping clips, but almost no catalogue sells anything under that name. Strapping clips are the small metal or plastic fasteners that hold a tensioned strap closed around a load. The same part is listed as a seal,…
Industrial Strapping System Components: What Each Part Does and Which One Caps Your Load
Updated September 2026 · By XCX Industrial strapping system components are the consumables that surround the load, the equipment that feeds, tensions and joins them, and the line-side hardware that presents the strap and moves the package. The system is…
PET vs PP Strapping: A Buyer’s Comparison Built on Joints, Loads and Standards
Updated September 2026 PET vs PP strapping is a choice between two different plastics, polyethylene terephthalate and polypropylene, extruded into flat strap. At equal width and thickness, PET strap carries higher tensile strength and lower elongation, while PP strap suits…
How to Choose Strapping Material for Industrial Shipping
Updated September 2026 · By XCX How to choose strapping material is a system decision: match the packaged load to an exact strap, completed joint, tool, route, and representative trial. Record settling and contact, then eliminate any candidate with an…
Package Testing for Strapping Changes: A Packaging Retest Guide
Package testing for strapping changes is a change-control process that starts with the delta, not with a standard list of drop, vibration, or compression tests. A new strap, supplier, joint, tool setting, load, or distribution route can change a different…
How to Test Strapping Joint Strength and Read the Failure
Updated August 2026 · By XCX Strapping joint strength is the peak force sustained by a completed strap joint under a stated test method. It is not the break strength of an unjointed strap. Joint efficiency equals joint peak force…
PET vs Steel Strapping: How to Compare the Whole Load System
Updated August 2026 · By XCX PET vs steel strapping is a whole-system comparison of two restraint options, not a material-name contest. There is no universal winner. PET can suit loads that settle or need elastic recovery, while steel remains…
Plastic Strapping Types: A Buyer’s Guide to PP, PET and Specialty Routes
![Plastic Strapping Types: PP vs PET [Buyer Guide]](https://udpackaging.com/wp-content/uploads/2026/08/plastic-strapping-types-featured-768x512.png)
Updated August 2026 · By XCX Plastic strapping types are commonly grouped first into two main extruded families: polypropylene and polyester, usually called PP and PET. Nylon or high-recovery strap is another industry-specific route. Woven and composite polyester products use…
